In Stock Specials and Closeouts

Yakima Replacement End Caps - Highlite Part # 8890235

Yakima Spare part for Q Towers One "B" Pad. Part # 8810080

Replace the cover on your Yakima RailGrab roof-rack towers (Y00138, Y00139, and Y00140) with this equivalent part. Cover slides over the allen bolt and lock core on the end of each tower. Includes 1 replacement cover. Features: Replaces the cover on your Yakima RailGrab roof-rack towers (Y00138, Y00139, and Y00140) Cover slides over the allen bolt and lock core on the end of each tower Includes 1 cover 8880149 Replacement Cover for Yakima Rail Grab Roof Rack Towers - Qty 1

Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.

Yakima 9mm Skewer Housing Part # 2061

This Q-Cam Cover Assembly replacement kit for the Yakima Q Tower includes one complete Q-Cam Cover Assembly. The cover includes a clip holder for Q Clips and a cam-action handle for closing the Q Tower. Features: Replaces 1 Q-Cam Cover Assembly for Yakima Q Tower Includes clip holder for Q Clips Has cam-action handle for closing Q Tower Specs: Application: Yakima Q Towers (Y00124,Y00135)and Q Stretch Kit (Y00134) Also fits the following discontinued Yakima products: Q Towers (8000105), Q Towers (8000112), Q Stretch Kit (8000120)

The Yakima Quick Hitch bike rack accessory can be installed without the use of tools on Yakima's ROC series 2 inch bike racks. The Yakima Quick Hitch is easy on your hands with texture coated wrench handle and injection molded knob. Features Only fits ROC series 2 inch bike racks Quick, tool-free installation Easy on hands with textured, coated wrench handle and injection molded knob Durable plated construction No loose parts Nice upgrade for older ROC products

Yakima Roc Solid hitch stabilizing bar for Yakima hitch racks.

Features: Replaces shank on Yakima BigHorn 4 hitch-mounted bike carriers Includes spacer insert for attaching bike carrier central mast Requires pin and clip - sold separately Application: Fits the following Yakima products: KingPin 2 8002400, KingPin 4 8002401

Yakima Replacement Cradle for Rattler Bedroc Upgrade Capacity for TerraGate 2 Holds one bike by the frame with ratcheting straps fits all single mast Yakima hitch products One cradle with straps, stabilizer, and installation hardware.

Yakima Tread Plate For Multi Sport Rack System This is NOS and the box has some wear Contents are brand new never used Yakima Tread Plate for Multi Sport Rack System TREADHEAD Treadski

Adaptor plates used for attaching a TreadHead or Locking TreadHead rack to the spare tires of various vehicles. Produced: 1993 - 1999 History: No visible changes. General Information: Weight: 4 lbs. Dimensions: Plate is 6-5/8 x 7-1/4”. Extension is 4-1/2” long. Capacity: Supports TreadHead to carry 2 bikes.

Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.

Yakima's DeadLock protects you in two important ways: first, it locks the outside bike to the rack with a cable and steel pin so all your bikes are safe and secure. Second, it locks the hitch-mounted rack to the vehicle so the rack can't get stolen, either. Plus, there's a universal key so you can easily unlock your bikes and rack as needed.

Download the Instructions The BoatLocker is a 10-foot cable that secures your boat to your roof rack. It can even attach to other immovable objects, like a tree. That comes in particularly handy when you're camping, so you Don't have to sleep with one eye open to make sure your boat won't get swiped. Plus, the included PaddleCuffs ensure you'll never be up you-know-what creek without a paddle. PRODUCT DETAILS Compatible with all types of kayaks and canoes SKS Locks included PRODUCT SPECS Weight: 1.30 lbs. Limited Lifetime Warranty

This is the complete locking skewer replacement for the Steelhead bike mount. It can also be used in the older "CutThroat" bike mount. Yakima SKS Lock core sold seperately. Part # 2062

The Yakima LandingPad are one component to the base rack solution for many cars with factory racks. LandingPad attaches to factory rack tracks, replacing the factory rack, if it has one, and creates a dependable Yakima multi-purpose base rack solution. Sold as a pair (order 2 pairs of Landing Pads to fit all 4 Control Towers on a multi-purpose base rack). Requires 2 Yakima cross bars (not included) and 4 Yakima Control Towers (not included). This is one component of a complete base rack system.. Custom Landing Pads fit a broad range of factory tracks and other applications. Includes a streamline snap-on cover when not in use. Pads sold in a pairs. 2 sets required for 1 complete Base Rack system. For specific fit information, see your dealer’s Fit List or Yakima.com. Custom Landing Pads fit a broad range of factory tracks and other applications. Includes a streamline snap-on cover when not in use. Pads sold in a pairs. 2 sets required for 1 complete Base Rack system. For specific fit information, see your dealer’s Fit List or Yakima.com.

Download the Instructions Predecessor to Q Towers, attaches load bars to vehicles using interchangeable clips. Produced: 1987 to 1996 History: Our first dedicated tower for gutterless cars. General Information: Weight: 6.75lbs per set (4) Height: 6.75” tall, 5.25” wide (base 5.25” x 2.5”) Capacity: Varies by car, see fit list Product Specs: - Limited Lifetime Warranty

Download the Instructions Download the Fit Sheet Product Description: The Yakima Locking RailRider 2 is a locking tower for vehicles with factory tracks/mounting points. They pivot to adjust to different angles on vehicles, so they won't tweak your roof. Product Features: Multi-sport tower carries the full load of gear and accessories Slide onto, and then lock down on, a base plate for easy on/off convenience Compatible with Yakima tracks Low profile design Lockable with SKS lock cores (sold separately) Crossbars sold separately Includes four Yakima end caps Fits: 91-97 Isuzu Rodeo, 91-99 Jeep Cherokee, 93-98 Jeep Grand Cherokee, 93-95 Jeep Grand Wagoneer, 91-98 Wagoneer, 95-00 Kia Sportage 4dr

Download the Instructions Product Description: The Yakima Locking RailRider 3 is a locking tower designed specifically for the Dodge Durango with factory tracks/mounting points. They pivot to adjust to different angles on vehicles, so they won't tweak your roof. Product Features: Multi-sport tower carries the full load of gear and accessories Slide onto, and then lock down on, a base plate for easy on/off convenience Compatible with Yakima tracks Low profile design Lockable with SKS lock cores (sold separately) Crossbars sold separately Includes four Yakima end caps Fits: 98-02 Dodge Durango

Download the INSTRUCTIONS Limited Lifetime Warranty

Download the INSTRUCTIONS PRODUCT DETAILS Fits raised or flush-mounted side rails with an interior track Dual claw design bites securely onto side rail Low-profile, sleek look Lockable with SKS cores – sold separately PRODUCT SPECS Weight: 3.81 lbs. Dimensions: L 3.75 in x W 4.50 in x H 5.00 in Limited Lifetime Warranty

Download the INSTRUCTIONS Its powerful claws are not quite as delicious as the ones you find on a crustacean. But they do grip a hundred times tighter than the world's most powerful lobster. PRODUCT DETAILS Custom claws ensure custom fit on factory racks Holds on with a vengeful death grip Simple tool-free installation Custom-molded rubber pads provide extra protection PRODUCT SPECS Weight: 5.00 lbs. Dimensions: L 5.25 in x W 2.75 in x H 3.50 in Limited Lifetime Warranty

Download the Instructions Spare tire mounted, lockable, two bike carrier Produced: 1998 - 1999 History: Introduced as a lockable version of the original TreadHead. Replaced with the SpareROC. General Information: Weight: 23 lbs. Dimensions: 16” wide x 31” tall x 17” extension Capacity: 2 bikes

The WaterRower Oak rowing machine is handcrafted in solid oak wood and features a Honey Oak stain finished in Danish oil. It features the S4 Performance Monitor. The WaterRower Oak rowing machine is handcrafted in solid oak wood, stained Honey Oak, and finished with Danish oil. Wood is an excellent material for this application due to its ability to absorb sound and vibration enhancing the WaterRower's smooth, quiet operation. The Oak, as with all WaterRowers, features patented WaterFlywheel technology, unrivaled in its replication of the resistance felt in on the water rowing.

Print Spec Sheet | Print Product Brochure

The Water Rower Club is hand crafted in solid Ash and stained for color. The Water Rower Club has been designed for High Traffic Areas such as Commercial Gyms, Studios, Rehabilitation Clinics, etc. Its Black Rails have been styled to prevent scuffing, other wooden components are finished in an attractive rosewood which are more resistant to soiling than the Natural model. Each machine has been hand finished with Danish Oil and Urethane for protection. Wood has been chosen due to its marvellous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's quietness and smoothness of use. Ash, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. For reasons of ecology, all our woods are harvested from replenishable forests. Please note: WaterRower will not provide support or documentation for any product transported outside of the original country of purchase.

Print Spec Sheet | Print Product Brochure

The Water Rower Club is hand crafted in solid Ash and stained for color.The WaterRower Natural is hand crafted in solid Ash and stained Honey Oak for consistency of color. Each machine has been hand finished with Danish Oil providing a deep lustre and warmth to the wood. Wood has been chosen due to its marvelous engineering properties, primarily its ability to absorb sound and vibration thus enhancing the WaterRower's quietness and smoothness of use. Ash, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. For reasons of ecology, all our woods are harvested from replenishable forests. Please note: WaterRower will not provide support or documentation for any product transported outside of the original country of purchase.

Print Spec Sheet | Print Product Brochure

The Water Rower Oxbridge is hand crafted in solid cherry wood. Like all woods, cherry wood may vary in color from a red-brown to deep red. The wood will darken in color with exposure to light. For this reason all WaterRower cherry wood components are kept in light free rooms to protect from shadowing. A new WaterRower Oxbridge will therefore appear quite light in color. The wood will however darken over time reaching a rich reddish hue. Please note: WaterRower will not provide support or documentation for any product transported outside of the original country of purchase. Each machine has been hand finished with three coats of Danish Oil giving a deep luster an warmth to the wood. Wood has been chosen due to its marvellous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's quietness and smoothness of use. Cherrywood, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. For reasons of ecology, all our woods are harvested from replenishable forests.