Yakima Spare part for Q Towers One "B" Pad. Part # 8810080

Replace the cover on your Yakima RailGrab roof-rack towers (Y00138, Y00139, and Y00140) with this equivalent part. Cover slides over the allen bolt and lock core on the end of each tower. Includes 1 replacement cover. Features: Replaces the cover on your Yakima RailGrab roof-rack towers (Y00138, Y00139, and Y00140) Cover slides over the allen bolt and lock core on the end of each tower Includes 1 cover 8880149 Replacement Cover for Yakima Rail Grab Roof Rack Towers - Qty 1

Yakima Replacement End Caps - Highlite Part # 8890235

Yakima 9mm Skewer Housing Part # 2061

SKS UPGRADE KIT FOR 1A TOWERS SKS Lock Cores purchased seperately

If you have the old 1C SST towers and Y-Clips and want to know if it will fit a pre-1998 car please check the attached list. Y-Clips have not been tested on vehicles made after 1998. Most fits for Y-Clips ended in 1994 with a limited number continuing until 1998. Use of the Y-clips on vehicles not listed is at your own risk and may result in damage or injury. Copy of SST_FitList.xls

Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.

This Q-Cam Cover Assembly replacement kit for the Yakima Q Tower includes one complete Q-Cam Cover Assembly. The cover includes a clip holder for Q Clips and a cam-action handle for closing the Q Tower. Features: Replaces 1 Q-Cam Cover Assembly for Yakima Q Tower Includes clip holder for Q Clips Has cam-action handle for closing Q Tower Specs: Application: Yakima Q Towers (Y00124,Y00135)and Q Stretch Kit (Y00134) Also fits the following discontinued Yakima products: Q Towers (8000105), Q Towers (8000112), Q Stretch Kit (8000120)

Replacement skewer for fork mount bike rack. Part # 2060

Features: Replaces shank on Yakima BigHorn 4 hitch-mounted bike carriers Includes spacer insert for attaching bike carrier central mast Requires pin and clip - sold separately Application: Fits the following Yakima products: KingPin 2 8002400, KingPin 4 8002401

The Yakima Quick Hitch bike rack accessory can be installed without the use of tools on Yakima's ROC series 2 inch bike racks. The Yakima Quick Hitch is easy on your hands with texture coated wrench handle and injection molded knob. Features Only fits ROC series 2 inch bike racks Quick, tool-free installation Easy on hands with textured, coated wrench handle and injection molded knob Durable plated construction No loose parts Nice upgrade for older ROC products

Yakima Roc Solid hitch stabilizing bar for Yakima hitch racks.

Yakima Replacement Cradle for Rattler Bedroc Upgrade Capacity for TerraGate 2 Holds one bike by the frame with ratcheting straps fits all single mast Yakima hitch products One cradle with straps, stabilizer, and installation hardware.

Product Description: The Yakima PlusNut TopLoader is a permanently mounted bracket that allows 1A Raingutter towers or Q Towers to be used in some situations where no rain gutters exist. Product Features: This item has been discontinued Works with Q Tower (Q41 clip) and 1A Raingutter Towers For specific fit information, see your dealer's Fit List

Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.

The Yakima LandingPad are one component to the base rack solution for many cars with factory racks. LandingPad attaches to factory rack tracks, replacing the factory rack, if it has one, and creates a dependable Yakima multi-purpose base rack solution. Sold as a pair (order 2 pairs of Landing Pads to fit all 4 Control Towers on a multi-purpose base rack). Requires 2 Yakima cross bars (not included) and 4 Yakima Control Towers (not included). This is one component of a complete base rack system.. Custom Landing Pads fit a broad range of factory tracks and other applications. Includes a streamline snap-on cover when not in use. Pads sold in a pairs. 2 sets required for 1 complete Base Rack system. For specific fit information, see your dealer’s Fit List or Yakima.com. Custom Landing Pads fit a broad range of factory tracks and other applications. Includes a streamline snap-on cover when not in use. Pads sold in a pairs. 2 sets required for 1 complete Base Rack system. For specific fit information, see your dealer’s Fit List or Yakima.com.

Yakima Tread Plate For Multi Sport Rack System This is NOS and the box has some wear Contents are brand new never used Yakima Tread Plate for Multi Sport Rack System TREADHEAD Treadski

Download the Instructions Predecessor to Q Towers, attaches load bars to vehicles using interchangeable clips. Produced: 1987 to 1996 History: Our first dedicated tower for gutterless cars. General Information: Weight: 6.75lbs per set (4) Height: 6.75” tall, 5.25” wide (base 5.25” x 2.5”) Capacity: Varies by car, see fit list Product Specs: - Limited Lifetime Warranty

Adaptor plates used for attaching a TreadHead or Locking TreadHead rack to the spare tires of various vehicles. Produced: 1993 - 1999 History: No visible changes. General Information: Weight: 4 lbs. Dimensions: Plate is 6-5/8 x 7-1/4”. Extension is 4-1/2” long. Capacity: Supports TreadHead to carry 2 bikes.

Yakima Wing Rider 2 #0302 58" Wing Rider Bars included with this NOS system. Works with wing rider bars only

Yakima's DeadLock protects you in two important ways: first, it locks the outside bike to the rack with a cable and steel pin so all your bikes are safe and secure. Second, it locks the hitch-mounted rack to the vehicle so the rack can't get stolen, either. Plus, there's a universal key so you can easily unlock your bikes and rack as needed.

Download the Instructions The BoatLocker is a 10-foot cable that secures your boat to your roof rack. It can even attach to other immovable objects, like a tree. That comes in particularly handy when you're camping, so you Don't have to sleep with one eye open to make sure your boat won't get swiped. Plus, the included PaddleCuffs ensure you'll never be up you-know-what creek without a paddle. PRODUCT DETAILS Compatible with all types of kayaks and canoes SKS Locks included PRODUCT SPECS Weight: 1.30 lbs. Limited Lifetime Warranty

This is the complete locking skewer replacement for the Steelhead bike mount. It can also be used in the older "CutThroat" bike mount. Yakima SKS Lock core sold seperately. Part # 2062

Download the INSTRUCTIONS Its powerful claws are not quite as delicious as the ones you find on a crustacean. But they do grip a hundred times tighter than the world's most powerful lobster. PRODUCT DETAILS Custom claws ensure custom fit on factory racks Holds on with a vengeful death grip Simple tool-free installation Custom-molded rubber pads provide extra protection PRODUCT SPECS Weight: 5.00 lbs. Dimensions: L 5.25 in x W 2.75 in x H 3.50 in Limited Lifetime Warranty

Download the Instructions Download the Fit Sheet Product Description: The Yakima Locking RailRider 2 is a locking tower for vehicles with factory tracks/mounting points. They pivot to adjust to different angles on vehicles, so they won't tweak your roof. Product Features: Multi-sport tower carries the full load of gear and accessories Slide onto, and then lock down on, a base plate for easy on/off convenience Compatible with Yakima tracks Low profile design Lockable with SKS lock cores (sold separately) Crossbars sold separately Includes four Yakima end caps Fits: 91-97 Isuzu Rodeo, 91-99 Jeep Cherokee, 93-98 Jeep Grand Cherokee, 93-95 Jeep Grand Wagoneer, 91-98 Wagoneer, 95-00 Kia Sportage 4dr

Forester Towers

PRODUCT SPECS Weight: 2.55 lbs. Dimensions: L 1.75 in x W 2.50 in x H 4.75 in Limited Lifetime Warranty Download the forester towers instr.pdf

• We cannot confirm compatibility with your vehicle.

Download the INSTRUCTIONS Limited Lifetime Warranty

- Heavy-duty steel brackets that accommodate lights of virtually any size or shape. - Sold in set of 2