Filter By:
- Accessories/Parts (60)
- Hitch-Mount (41)
- Pickup/RV/Spare-Tire Mount (20)
- Roof-Mount (37)
- Trunk-Mount (7)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Car Racks

$24.00
$30.00
20% Off
Features:
Replaces shank on Yakima BigHorn 4 hitch-mounted bike carriers
Includes spacer insert for attaching bike carrier central mast
Requires pin and clip - sold separately
Application:
Fits the following Yakima products: KingPin 2 8002400, KingPin 4 8002401

$79.20
$99.00
20% Off
Download the Instructions
Predecessor to Q Towers, attaches load bars to vehicles using interchangeable clips. Produced: 1987 to 1996 History: Our first dedicated tower for gutterless cars. General Information: Weight: 6.75lbs per set (4) Height: 6.75” tall, 5.25” wide (base 5.25” x 2.5”) Capacity: Varies by car, see fit list
Product Specs:
- Limited Lifetime Warranty

$47.99
$59.99
20% Off
This is the complete locking skewer replacement for the Steelhead bike mount. It can also be used in the older "CutThroat" bike mount.
Yakima SKS Lock core sold seperately.
Part # 2062

$72.00
Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.

$139.00 - $245.00
No rails? No problem. The versatile BaseLine’s intelligent design and advanced adjust ability help it morph to the shape of your car’s roof for a sleek, secure, load-it-up fit. - Secure, easy-to-use tower specifically designed for cars without roof rails or gutters - Advanced tower architecture is sleek, strong and quiet - Works with JetStream, CoreBar and RoundBar crossbars - Tri-axial DropHook clip adjustment easily adjusts to a wide range of roof shapes for safe, secure hold - BarBed has 12° of pitch adjustment to optimize tower position and level bars on rounded roofs - Super-simple installation – tool included - Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating - Easily locks to you vehicle with our SKS system (sold separately) - RoundBar SL Adapter required to use Yakima's classic RoundBar with - StreamLine System Towers (sold separately) - Streamline crossbars are compatible with any StreamLine Tower StreamLine Tower TECHNICAL SPECS - Dimensions: L 5.00” x W 6.00” x H 4.00”

$39.00
Give your truck bed a permanent bike-mounting solution with this fork-style mount. In fact, this mount, with single-sided adjustment skewer for easy loading, can be installed anywhere you can put a couple bolts. Go ahead, get creative.
- A "bolt anywhere" fork-style bike mount
- Fits bikes with 9mm x 100mm front hubs
- Corrosion-resistant anodized aluminum construction
Product Specs:
- Weight: 0.50 lbs.
- Dimensions: L 4.00 in x W 1.50 in x H 1.87 in
- Limited Lifetime Warranty

$47.20
$59.00
20% Off
Download the Instructions
The BoatLocker is a 10-foot cable that secures your boat to your roof rack. It can even attach to other immovable objects, like a tree. That comes in particularly handy when you're camping, so you Don't have to sleep with one eye open to make sure your boat won't get swiped. Plus, the included PaddleCuffs ensure you'll never be up you-know-what creek without a paddle.
PRODUCT DETAILS
Compatible with all types of kayaks and canoes
SKS Locks included
PRODUCT SPECS
Weight: 1.30 lbs.
Limited Lifetime Warranty

$8.00
$10.00
20% Off
Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.

$195.00 - $199.00
Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)

$39.20
$49.00
20% Off
Yakima's DeadLock protects you in two important ways: first, it locks the outside bike to the rack with a cable and steel pin so all your bikes are safe and secure. Second, it locks the hitch-mounted rack to the vehicle so the rack can't get stolen, either. Plus, there's a universal key so you can easily unlock your bikes and rack as needed.

$95.99
$119.99
20% Off
Download the INSTRUCTIONS
PRODUCT DETAILS
Fits raised or flush-mounted side rails with an interior track
Dual claw design bites securely onto side rail
Low-profile, sleek look
Lockable with SKS cores – sold separately
PRODUCT SPECS
Weight: 3.81 lbs.
Dimensions: L 3.75 in x W 4.50 in x H 5.00 in
Limited Lifetime Warranty

$79.99
$99.99
20% Off
Download the Instructions
Download the Measurements
You've got enough noise coming from the people in the backseat. Keep car noise to a minimum with a fairing. This finishing touch to your rack system moves air flow up and over the rack, which not only reduces noise, but drag as well to aid gas mileage.
PRODUCT DETAILS
Moves wind up and over rack, reducing noise and drag.
Includes one fairing. Hardware included for quick installation.
Only for use with round crossbars
Also a great place to show off your sticker collection
PRODUCT SPECS
Weight: 2.00 lbs.
Dimensions: L 32.00 in x W 5.00 in x H 8.5 in
Limited Lifetime Warranty

$59.00 - $65.00
This fork adapter allows you to put your thru-axle fork on any 9mm fork-mounted bike rack.
- Axle not included. Works with your bike's thru-axle
- Fits all fork bike mounts including, Yakima, Thule, Rocky Mounts, etc.
- Built-in safety tabs
- Durable black powder-coat finish
Product Specs:
- Weight: 0.32 – 0.38 lbs.
- Minimum Crossbar Spread 16in
- Maximum Crossbar Spread 42in
- Limited Lifetime Warranty

$229.00
Friends will double-take when they see our most versatile, aerodynamic bike mount on your car. It carries your complete bike—no wheel removal needed. The universal mounting system fits nearly any crossbars you can think of.
- Fits Yakima round, square, factory or aerodynamic crossbars
- Zero contact with frame; carbon fiber and custom paint jobs are protected
- Accommodates disc brakes, thru axles, and full suspension bikes
- Holds bike upright while you secure the bike to the mount
- Leave your front wheel on for easy loading (some fenders may need to be removed to transport bike)
- No tools or assembly required
- Fits 20" to 27.5" wheels with tire widths up to 3" and 29" wheels with tires widths up to 2.7"
- SKS Locks sold separately
- 1 bike, up to 40 lbs at min of 18" crossbar spread; or up to 30 lbs at min of 16" crossbar spread
- Accommodates bike wheelbases up to 48"
Product Specs:
- Weight: 13.00 lbs.
- Dimensions: L 56.00 in x W 7.00 in x H 7.50 in
- Minimum Crossbar Spread 16.00in
- Maximum Crossbar Spread 42.00in
- Limited Lifetime Warranty

$20.00
Yakima's Glass Hatch Hook is an alternative strap for "Joe" series racks used on cars where standard hooks cannot be used.

$229.00
Versatile, adaptable, and super low-maintenance, the JayLow provides maximum loading and minimal fuss. Carry one boat in cradle position, or two boats in stacker position. Carry 1 boat in J-cradle position or 2 boats in vertical, stacker position - Fully assembled out of the box - Tool-free installation Fits Yakima round, square, factory, or aerodynamic bars - Adjust the upright position with the easy-to-use integrated cam lever - Folds flat when not in use - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs - SKS Locks sold separately - Supports one boat up to 80 lb or two boats with combined weight of 110 lbs or less - Minimum crossbar spreads of 24inches or more

$245.00
Step up to the completely new Yakima bar. Thoroughly wind-tunnel tested, the black JetStream's JetFlow design is exceptionally aerodynamic, incredibly strong, lightweight, and really quiet on the move. The root of a modern rack system, it carries a lot and looks good doing it. Shopping for a full Yakima Roof Rack System? Use our Fit My Car tool to get outfitted with everything you need for a Base Rack System.
- Comes with 2 Crossbars and 4 Endcaps
- Wind-tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic
- Seamless extruded aluminum construction is light, strong and sleek
- JetTruss internal support engineering adds serious strength for minimal weight
- T-slot with SmartFill push-down infill for easy mount attachment and efficient airflow
- Clear anodized alloy finish and high-gloss polymer end caps look awesome on your roof
- Streamline crossbars are compatible with any StreamLine Tower
- Need an adapter? Mighty Mount 39H will let you mount round and square bar accessories on your JetStreams
- Find the right bar style and length to fit your needs
- Compare four crossbar styles and features to learn more

$54.40
$68.00
20% Off
The Yakima LandingPad are one component to the base rack solution for many cars with factory racks. LandingPad attaches to factory rack tracks, replacing the factory rack, if it has one, and creates a dependable Yakima multi-purpose base rack solution. Sold as a pair (order 2 pairs of Landing Pads to fit all 4 Control Towers on a multi-purpose base rack). Requires 2 Yakima cross bars (not included) and 4 Yakima Control Towers (not included). This is one component of a complete base rack system..
Custom Landing Pads fit a broad range of factory tracks and other applications.
Includes a streamline snap-on cover when not in use.
Pads sold in a pairs. 2 sets required for 1 complete Base Rack system.
For specific fit information, see your dealer’s Fit List or Yakima.com.
Custom Landing Pads fit a broad range of factory tracks and other applications.
Includes a streamline snap-on cover when not in use.
Pads sold in a pairs. 2 sets required for 1 complete Base Rack system.
For specific fit information, see your dealer’s Fit List or Yakima.com.

$119.99
$149.99
20% Off
Download the INSTRUCTIONS
Its powerful claws are not quite as delicious as the ones you find on a crustacean. But they do grip a hundred times tighter than the world's most powerful lobster.
PRODUCT DETAILS
Custom claws ensure custom fit on factory racks
Holds on with a vengeful death grip
Simple tool-free installation
Custom-molded rubber pads provide extra protection
PRODUCT SPECS
Weight: 5.00 lbs.
Dimensions: L 5.25 in x W 2.75 in x H 3.50 in
Limited Lifetime Warranty

$119.99
$149.99
20% Off
Download the INSTRUCTIONS
They clamp right onto your crossbars and hook onto your rack’s raised side rails. And the name reminds you of that cool song from the '70s.
PRODUCT DETAILS
Broader range of fit - from small to big rails
Grabs hold of the crossbar with an iron grip
Lower profile provides sleek, integrated look
Install towers in seconds with a simple lever turn - no tools needed
Custom molded rubber pads on tower body and claw for protection
Lockable with SKS cores - sold separately
Patented technology. So don't expect to see this stuff on another website.
Sold in sets of 4. Also sold in pairs, part# 8000114
PRODUCT SPECS
Weight: 6.00 lbs.
Dimensions: L 6.00 in x W 3.50 in x H 4.00 in
Limited Lifetime Warranty

$65.00
- Heavy-duty steel brackets that accommodate lights of virtually any size or shape.
- Sold in set of 2

$55.00
Use Yakima's LoadWarrior Stretch Net to secure and control loads on the LoadWarrior rooftop cargo rack (sold separately). The multi-hook design is versatile and easy to use.

$88.00
$110.00
20% Off
Download the Instructions
Download the Fit Sheet
Product Description:
The Yakima Locking RailRider 2 is a locking tower for vehicles with factory tracks/mounting points. They pivot to adjust to different angles on vehicles, so they won't tweak your roof.
Product Features:
Multi-sport tower carries the full load of gear and accessories
Slide onto, and then lock down on, a base plate for easy on/off convenience
Compatible with Yakima tracks
Low profile design
Lockable with SKS lock cores (sold separately)
Crossbars sold separately
Includes four Yakima end caps
Fits: 91-97 Isuzu Rodeo, 91-99 Jeep Cherokee, 93-98 Jeep Grand Cherokee, 93-95 Jeep Grand Wagoneer, 91-98 Wagoneer, 95-00 Kia Sportage 4dr

$88.00
$110.00
20% Off
Download the Instructions
Product Description:
The Yakima Locking RailRider 3 is a locking tower designed specifically for the Dodge Durango with factory tracks/mounting points. They pivot to adjust to different angles on vehicles, so they won't tweak your roof.
Product Features:
Multi-sport tower carries the full load of gear and accessories
Slide onto, and then lock down on, a base plate for easy on/off convenience
Compatible with Yakima tracks
Low profile design
Lockable with SKS lock cores (sold separately)
Crossbars sold separately
Includes four Yakima end caps
Fits: 98-02 Dodge Durango

$127.99
$159.99
20% Off
Download the Instructions
Spare tire mounted, lockable, two bike carrier Produced: 1998 - 1999 History: Introduced as a lockable version of the original TreadHead. Replaced with the SpareROC. General Information: Weight: 23 lbs. Dimensions: 16” wide x 31” tall x 17” extension Capacity: 2 bikes

$39.20
$49.00
20% Off
These MightyMounts are simple attachments that make several gear-specific Yakima mounts compatible with Whispbar.
- Simple snap-around adapter allows Yakima bike, boat and cargo accessories to be attached to Whispbar rack systems
- Quick and easy installation and removal; no tools required
- 32H fits onto Whispbar Flush, Through and RailBar rack systems
- Allows the attachment of the following Yakima accessory mounts: HighRoller, Raptor, Mako Saddle, LandShark, KayakStacker, HullyRoller, HullRaiser, BasketCase and WheelFork
- Sold as a set of 4 and uses the hardware provided with the accessory mount
Product Specs:
- Weight: 0.47 lbs.
- Limited Lifetime Warranty
Page 1 of 6
Next page