Other

Get back on the trail with a quality replacement hanger. - Attachment hardware is sold separately - For use with 142x12mm, 148x12mm, 157x12mm, and 197x12mm hubs Specifications: - Size: Rear drive side, Thru Axle - Mounting location: Rear drive side - Attachment: Thru axle nut

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

- Wears and functions like other links on the chain - SIL-TEC surface treatment - Tool free installation possible - TL-CN10 is available as SM-CN900-11 - Single use

- Grade 10 chromium steel balls

- Quiets chain slap and protects chainstays from nicks and scratches - Standard protector fits most chainstays - Universal kits come with circle protectors to eliminate frame damage due to cable rub

These bar end adapters are required if you wish to add clamp-style bar ends to your Bontrager Satellite Plus Isozone handlebars. - Required for bar end use on Satellite Plus Isozone bars - For use with clamp style bar ends - Includes 2 adapters and 2 rubber handlebar inserts. - Bar end sold separately

Original equipment replacement rear derailleur hangers. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team

A well-exercised dog is a happy dog, so give Fido a good workout while you ride! Sunlite's Dog Leash consists of a metal bar that mounts under the rear axle bolt or quick-release and straps to your chainstay. This keeps the center of gravity low so you stay stable if your dog pulls to one side. The bar is long enough to keep your pup away from the bike, too.

When you need to move your handlebars up, install Sunlite's Chromoly Quill Stem Extender. One end goes inside the steerer tube and your quill stem inserts into the top. It provides 8 1/4 inches of rise and is compatible only with quill stems and steerer tubes.

Genuine replacement parts When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered. Details: - Replacement cartridge units for Bontrager Line Dropper seat posts - Be sure to use the correct size cartridge for the respective amount of travel - Regular maintenance will help maintain performance and extend the lifespan

Key features: - Cable actuated remote lever for the Bontrager Drop Line dropper seatpost - Also compatible with most other cable-actuated dropper seatposts - Under Bar Lever is designed to ergonomically replace the left shifter on 1x drivetrains - Universal Lever is compatible with 1x, 2x, 3x drivetrains and left or right hand placement - Use with: Drop Line Seatpost

Key features: - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with the Madone KVF Aero Integrated Bar/Stem - Add any XXX accessory mount (sold seperately) for an elegant, integrated look

Key features: - Original equipment replacement saddle ears for use with Bontrager saddles with carbon rails - Compatible with Bontrager and Trek rotary head seatpost and seat mast systems - Consult with manufacturer on compatibility with other saddle brands

Thin, durable clear chainstay protector with extra-strong adhesive. - Overall length - 10.375

Nylon fiber OS adapters are designed for use in frames with worn-out, oversized bottom bracket shells - Replaces standard nylon fiber overmolds found on Origin8 Revolvr BB30 and PF30 outboard thread-together bottom brackets - Use BB30 OS adapters with Origin8 Revolvr BB30 outboard thread-together bottom brackets 211051 and 211052 - Use PF30 OS adapters with Origin8 Revolvr PF30 outboard thread-together bottom brackets 211053 and 211054 - Requires a special installation/removal tool (P/N# 610817) - Shell: 68/73mm x 46~46.1mm - Interface: PF30 - Cup Material: Nylon Fiber

BB30 Spacer - 15.46mm

- AL6061-T6 alloy seatpost clamp with CNC-machined cut-outs - Rounded edges and floating bolt/ovalized hole design protects carbon frames and seatposts - 29.8mm for 27.2mm seatpost and chromoly frame - 31.8mm for 27.2mm seatpost and aluminum frame - 34.9mm for 30.9mm seatpost and aluminum frame, or 31.6mm seatpost and carbon frame - 16mm height

Cold forged and fully CNC-machined from several high-strength aluminum alloys, new Box One™ Stem Locks offer peace of mind and a level of added protection against losing your front wheel and fork legs in the event of a broken steerer tube. All new Box One™ Stem Locks are backward compatible with existing Box forks and may work with forks from other manufacturers.

Origin-8's Pro Force QR Seat Clamp is forged and machined from light and durable aluminum and has an extra-leverage design to hold fast. This fine clamp boasts an anodized finish and a long quick-release lever for excellent clamping force. It also gives you more to hold onto so it's easier to raise/lower your seat.

- Push-in replacement CNC alloy bar end plugs - MTB-specific design - Anodized alloy end caps - Compatible with most handlebar styles - 20mm OD plug/25mm OD end cap (Road) - 20mm OD plug/30mm OD end cap (MTB)

Replacement hoods for Origin8 Pro Force LP road brake levers

BB30 service kit includes (2) Enduro 6806 ABEC-5 Angular Contact sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Replacement M8 Nut/Bolt Set for Wheels Mfg derailleur hangers. - M8 chainring bolt style fastener - Use with 5mm hex wrench

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.

This fine pair of Surly 10/12 Adapter Washers is designed to adapt any 135, 170, or 190mm O.L.D. QR axle hub with a 142, 177 or 197mm spaced thru-axle frame. Make sure the QR axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.

These 6mm long bolts are designed for single chainrings that have non-threaded standoffs. Uses a double hex head interface so you don't have to use a chainring nut spanner. - 6mm length - Made in the US out of 7075-T6 Aluminum - Has hex heads on both the bolt and nut for easy installation - Max torque of 7-8 Nm with light grease on threads only