Other

- Top lock nut for threaded headsets - Includes water seal - Bag of 10 Lock Nuts

Gain an aerodynamic advantage with Origin-8's Tri Clip-On Aero Bars. These aluminum clip-ons fit a wide range of handlebars. With independent arm rests and bar-angle and reach adjustments, it's easy to get a great-fitting aero setup.

Origin8's Twistr 15mm Top Cover is a high profile 15mm top cover for Origin8 Twistr Series headsets. This CNC-machined AL6061 top cover is sealed to keep moisture and grit away from the bearings.

• Fits 3/8" Axles • Lightweight, compact design • Forged aluminum construction • Chromoly bolt

Replacement brake hoods for Origin8 Pro Force road levers

- AL6061 alloy construction - Non-keyed design - Jar of 10 spacers

- Expanding replacement bar end plugs with hex bolt - Anodized alloy end caps - Compatible with most handlebar styles - 18.2mm OD expander/25.5mm OD end cap

- Push-in replacement CNC alloy bar end plugs - MTB-specific design - Anodized alloy end caps - Compatible with most handlebar styles - 20mm OD plug/25mm OD end cap (Road) - 20mm OD plug/30mm OD end cap (MTB)

- Replacement Cassette body for BlackOps hubs - Compatible with part #37070 / 37071 / 37072

Origin-8's Capster is a top cap, bolt and star nut for your 1 1/8-inch threadless headset. It comes in many colors so you can customize your ride.

Origin-8's Carbon Fiber Headset Spacers are made of lightweight, durable carbon and come in 5mm, 10mm or 20mm thicknesses. You get a bag of five spacers.

• Chain tensioner w/integrated derailleur hanger • Fits most 3/8-inch horizontal dropouts

- AL6061-T6 alloy quick-release seatpost clamp - Stainless steel bushing ensures smooth lever action - Adjustment knob allows for on-the-fly fine-tuning - Rounded edges and floating bolt/ovalized hole design protects carbon frames and seatposts - 28.6mm for 25.4mm seatpost and steel frame - 29.8mm for 27.2mm seatpost and chromoly frame - 31.8mm for 27.2mm seatpost and aluminum frame - 34.9mm for 30.9mm seatpost and aluminum frame, or 31.6mm seatpost and carbon frame - 16mm height

- AL6061-T6 alloy seatpost clamp with CNC-machined cut-outs - Rounded edges and floating bolt/ovalized hole design protects carbon frames and seatposts - 29.8mm for 27.2mm seatpost and chromoly frame - 31.8mm for 27.2mm seatpost and aluminum frame - 34.9mm for 30.9mm seatpost and aluminum frame, or 31.6mm seatpost and carbon frame - 16mm height

Replacement brake hoods for Origin8 Classique Sport road levers

Origin-8 1mm Disc Brake Washers. Works with most disc brake calipers. Ideal for mounting/spacing applications. - Stainless steel - 6mm I.D. - 10 per bag

• Machined alloy arm • (ISCG Mount) international standard • Adjustable design • Sealed cartridge bearing • Prevents dropped chains on mountain bikes

Origin-8's Down Tube Shifter Adapter is perfect for mounting down tube style shift levers on a bicycle that doesn't have provisions on the frame for them. It's made of light and durable machined aluminum with an anodized finish and fits frames with 1 1/8- to 1 1/4-inch diameter down tubes. Mounting hardware and shims are included.

Origin-8's Grip N Seal QR Seat Clamp is forged from light and durable aluminum and features a rubber weather seal and an anodized finish to prevent corrosion. Its high-leverage quick-release lever makes it easy to raise/lower your seat.

Threaded headset keyed locknut washer - Bag of 10

Origin-8's Low-Profile Ahead Cap is a sleek option for your a 1 1/8-inch fork/headset. It includes the bolt and star nut. - For 1-1/8-inch forks - 30 grams

• 6061-T6 tubular aluminum construction • Laser etched graphics • Independent arm rest and bar adjustment • Does not include armrests • Cannot mount shifters onto ends • Clamp diameter: 25.4-31.8mm • Extension length: 105mm

Axle Adapters for use with MT-3100 series hubs - Aluminum alloy shells resist corrosion and provide lightweight longevity - Sealed cartridge bearings offer smooth operation while resisting contaminents - 15mm Thru Axle, 6 bolt disc compatible in boost and standard configurations - Spacing/Axle: 12TA 142mm

Replacement hoods for Origin8 Pro Force LP road brake levers

Origin-8's Pro Force QR Seat Clamp is forged and machined from light and durable aluminum and has an extra-leverage design to hold fast. This fine clamp boasts an anodized finish and a long quick-release lever for excellent clamping force. It also gives you more to hold onto so it's easier to raise/lower your seat.

Origin-8's Pro Cable Guide Pulley fulfills all your special cable routing needs. Designed to clamp onto seat tube, it allows you to route your cable for bottom pull front derailleurs. Uses a sealed bearing pulley.

Turn your geared bike into a singlespeed machine with Origin-8's Pro Pulsion UL Chain Guide. It mounts to your derailleur hanger and provides a smooth, quiet, and adjustable means of tensioning the excess chain slack on any bike. The machined, lightweight design features a spring-loaded tension pulley and cna be adjusted for perfect chainline.

Nylon fiber OS adapters are designed for use in frames with worn-out, oversized bottom bracket shells - Replaces standard nylon fiber overmolds found on Origin8 Revolvr BB30 and PF30 outboard thread-together bottom brackets - Use BB30 OS adapters with Origin8 Revolvr BB30 outboard thread-together bottom brackets 211051 and 211052 - Use PF30 OS adapters with Origin8 Revolvr PF30 outboard thread-together bottom brackets 211053 and 211054 - Requires a special installation/removal tool (P/N# 610817) - Shell: 68/73mm x 42~42.1mm - Interface: BB30 - Cup Material: Nylon Fiber

- Machined AL6061 alloy construction - Center sleeve for use with Revolvr outboard bottom brackets - Converts 68/73mm outboard bottom bracket to a 100mm or 120mm fat bike model - Seals and protects the bearings from harmful contaminants - Center sleeve only: Revolvr outboard bottom brackets sold separately

Nylon fiber OS adapters are designed for use in frames with worn-out, oversized bottom bracket shells - Replaces standard nylon fiber overmolds found on Origin8 Revolvr BB30 and PF30 outboard thread-together bottom brackets - Use BB30 OS adapters with Origin8 Revolvr BB30 outboard thread-together bottom brackets 211051 and 211052 - Use PF30 OS adapters with Origin8 Revolvr PF30 outboard thread-together bottom brackets 211053 and 211054 - Requires a special installation/removal tool (P/N# 610817) - Shell: 68/73mm x 46~46.1mm - Interface: PF30 - Cup Material: Nylon Fiber