Parts & Accessories

Wheel magnet for all CatEye cycle computers

The SmartphoneHub transforms your bike into a fully networked eBike. The smartphone and COBI.Bike app turn the SmartphoneHub into an intelligent control center that can be used for navigation, recording activities, and connection to other. The eBike can also be ridden without a smartphone due to the integrated display in the SmartphoneHub, showing the most important riding data. - The SmartphoneHub and the COBI.Bike app connect the eBike to the digital world and allow for navigation, music streaming, fitness tracking, and integration of other services and apps such as Strava - A 1.52-inch display allowing for use without a smartphone - The COBI.Bike app gives eBikers a permanent overview of the most important training data. such as performance, cadence and calorie consumption - The COBI.Bike app allows access to music and audiobook streaming services, such as Spotify or Audible, which can be operated by remote control - The SmartphoneHub charges phones using the eBike battery - Walk assistance function helps you push your eBike at speeds of up to 6 mph

Get your computer dialed with the perfect magnet Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. - Universal crank magnets sized for your bike and sensor - Compatible with all cadence sensors

Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount rear light to the back of your Bontrager Circuit MIPS road bike helmet - Tested with an accelerometer for intended breakaway point if involved in a crash

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Garmin High Mount for a clean, flush look that securely holds your Garmin centered over the stem. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Garmin GPS - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Garmin Low Mount to add a Garmin GPS directly to the Blendr stem mount. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Garmin GPS - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

Blendr add-on to Kovee Pro 35 stems Clean up your Bontrager Kovee Pro 35 stem cockpit with Blendr Pro bases. - Blendr works with this simple formula: Stem + Base + Mount. Add accessory - Bases for use with the Kovee Pro 35mm stem - Add any accessory mount (sold separately) for an elegant, integrated look

Genuine Bontrager cycling computer mounting accessories and replacement parts. - Replacement adapter for the Insta-Mount system - Universal mount permanently attaches to the back of your phone or other device - Use with Bontrager Trip mount for seamless Blendr capability

Pro Blendr is the ultimate computer integration system for clean and easy installation, made from durable alloy. - Blendr is an elegant, integrated accessory mounting solution - Alloy design provides clean and secure mounting of computers - Adapter pucks available for Wahoo and Garmin computers (sold separately) - Compatible with all Blendr bases - Attach your Garmin tether for an additional layer of security

Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. Key features: - Universal crank magnets work with any cadence sensor - Get the perfectly sized magnet, sized right for your bike and sensor - 20mm cadence magnet improves signal for wider gaps between crank and sensor

Keep your computer and sensors ready for every ride with replacement batteries Key features: - CR2032 battery is used for most Trek and Bontrager computers - 23AE battery is used for the Bontrager Interchange Analog Wireless Sensor - LR44 and L1154 batteries are identical and used in Bontrager SpeedTrap Sensor

Bontrager's DuoTrap Digital Speed/Cadence Sensor pulls double duty for your ANT+ cycling computer. It wirelessly transmits speed and cadence data and fits directly into the chainstay of certain Trek bicycles for a clean look that installs in seconds.

Connect ANT+ and Bluetooth Smart devices to all of the data available from the DuoTrap S sensor for your on-the-bike wireless needs. • ANT+ 2.4 GHz and Bluetooth Smart wireless digital speed and cadence sensor • ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone • For use with many ANT+ and Bluetooth Smart wireless technology enabled devices • Includes Bontrager wheel magnet, crank cadence band, and CR2032 battery • Works with Trek DuoTrap compatible bikes

Replacement chainstay cover for DuoTrap S Digital Sensor

Easily mount a cell phone and case directly to your bars for safe convenient access with the Insta-Mount and keep all of your favorite cycling and fitness apps safely accessible. • Mount your hard-shell smart phone case to your bike • Allows for easy access of phone on stem or handlebar • Includes Insta-Mount, universal mount, and application grid • Blendr-compatible

Get more data from your rides with the Bontrager Interchange digital combo speed and cadence sensor. This ANT+ 2.4 Ghz is designed to work with Bontrager Node wireless computers. It also works with many other ANT+ enabled devices. Sensor adjustment is easy with the adjustable arm. • ANT+ 2.4 Ghz and Bluetooth Smart wireless digital speed and cadence sensor • ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone • For use with many ANT+ and Bluetooth Smart wireless technology enabled devices • Independently adjustable arm for precise alignment of speed and cadence sensors • Includes Bontrager wheel magnet and crank cadence band • Includes silicone mounting strap to fit most chainstays and CR2032 battery • Visit www.thisisant.com/directory/ for compatible ANT+ devices • Visit www.bluetooth.com/pages/bluetooth-smart-devices.aspx for compatible Bluetooth devices

The adapter puck is required for mounting Garmin head units to the Pro Blendr Alloy Computer Mount. - Start with a Blendr stem, add the appropriate base, and finish with Pro Blendr Alloy Computer Mount and Garmin Adapter Puck for secure mounting of your Garmin head unit. Blendr is an elegant, integrated accessory mounting solution - For use with Garmin head units and Pro Blendr Alloy Computer Mount - Removable design alloys quick and easy adapter puck replacement - Attach your Garmin tether for an additional layer of security

The adapter puck is required for mounting Wahoo head units to the Pro Blendr Alloy Computer Mount. - Start with a Blendr stem, add the appropriate base, and finish with Pro Blendr Alloy Computer Mount and Wahoo Adapter Puck for secure mounting of your Wahoo head unit. Blendr is an elegant, integrated accessory mounting solution - For use with Wahoo head units and Pro Blendr Alloy Computer Mount - Removable design alloys quick and easy adapter puck replacement

- Replacement parts and accessories for SpeedTrap Digital Speed Sensor - Fork Cap covers SpeedTrap pocket when sensor is removed - Spacer is required on some forks to position sensor closer to wheel magnet

Bontrager's SpeedTrap Digital Speed Sensor conveniently plugs into any Bontrager fork with SpeedTrap technology for the ultimate in convenience. And, it wirelessly transmits speed data to your ANT+ cycling computer.

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Trip Computer Mount for a clean, flush look that securely holds your Bontrager Trip computer in a perfect position to see on the go. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Insta-Mount or Trip Computer - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

Genuine Bontrager cycling computer mounting accessories and replacement parts. - Ensure your Bontrager cycling computer properly stays in place. - Compatible with RIDEtime, Trip 100, 200, and 300 computers. - One size fits all.

Fits all phones with and without cases. Keep your phone within reach and storage for keys, wallet, charger and energy bar. Mount phone to top tube/frame or stem. - Easy in/out mounting of phone. - Secures phone with adjustable shock cord. - Easy to install with multiple cut-to-length straps. - Straps are multi-positional. - Dimensions: 6" x 3.5" x 3", 70 cubic inches

Are you looking for an incredibly simple way to mount your phone to your bicycle? Do you want that case to have a plethora of mounting options and accessories? Well... look no further than the ElastoKASE from BiKASE. Utilizing the 1/8 turn connection of the GoKASE and the simplicity of a rubber lined, gripping shock cord, the ElastoKASE is your "go to" phone or anything case. • Phone holder for 6-inch phones and smaller • Works with GoKASE attachments and brackets • Material: TPE & Shock Cord

The SuperBand is a tough, lightweight, and simple solution to attach virtually anything to your bike. - Fits all size smartphones with or without a case (iPhone 10/X, 11, X plus, 7, plus, 8 plus, Samsung Galaxy, Samsung Note, Google Pixel 2, Google Pixel 2 XL, OnePlus, etc.) - Easily holds down small items such as a light jacket, sunglasses, energy bars, pump, tubes, C02 cartridges, water bottle, flashlight, Bluetooth speaker, etc. - Easily attaches to the top tube, stem, or seat post using durable rubber O-rings (2 sizes included) - Can be attached to the water bottle bolts or a separate water bottle bracket - Use on a bicycle, golf cart, stroller, ATV/UTV

Low Road position places the computer in front of the bar and nearly flush with the top of the bar, making for an easy to read display whether you are on the hoods or in the drops. - Sub-20 gram computer mount - Compatible with computers with 1/4 turn twist lock interface and 31.8mm bar surface - Single Torx T25 fixing bolt

Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz

• Fits head & derailleur tubes to mount accessories on a USS (under-seat steering) recumbent

- Shift buttons mounted to the end of a bar plug - Included wire connects to Blip Box - Fits bars with 19 - 20.5mm inside diameter

Significantly smaller, the SRAM eTap AXS BlipBox is now easier to integrate — mounting inside a stem faceplate cap, feed box, or frame. It's also AXS enabled, for easy personalization. Simple, intuitive, aero. - Replaces standard drop bar shift levers - Simple and intuitive eTap shift logic - AXS enabled for easy personalization - Limitless aero configurations - Two ports per side for Blips - Fits the included optional stem mount - Compatible with existing eTap Blips and Clics - Mounts inside stem faceplate cap, feed box or frame

Wire harness and hardware to measure computer data based on the rear wheel - Contains bracket with 130cm wire, wheel magnet (fits up to 4mm bladed spokes) and zip ties - Bracket fits most bars (25.4 to 31.8mm) - Compatible with: Protegé 5.0, 8.0 and 9.0 - Ideal for rear wheel indoor bicycle trainers

Replace your worn or damaged wiring on Origin8 wired computers (97517 / 97570) - Includes bracket with (155cm) wired sensor, screw magnet and 4 cable ties - Includes: Wiring Kit - Compatibility: Data Station 8 / 10 ** HEAD mount is HANDLEBAR mount only (not stem)

• Handlebar mount for Garmin Edge 200, 500, and 800 • Fits handlebars 22.2 to 31.8mm (Shims included) • Forged and CNC`d alloy construction

- CNC machined AL6061 alloy GoPro mount for handlebars or seatposts - Accepts GoPro mounting style compatible accessories - GoPro mount rotates 90° for ideal positioning of accessories - Fits 22.2mm, 25.4mm, and 31.8mm handlebars with included adapter - Fits 27.2mm, 30.9mm, and 31.6mm seatposts with included adapter

- CNC machined AL6061 alloy Garmin stem mount - Mounts to a stem`s faceplate by means of two included M5 x 18mm stem bolts - Compatible with Garmin Edge 200, 500, 510, 520, 800, 810, 910, 920, and 1000

- CNC machined AL6061 alloy Garmin/GoPro stem mount - Mounts to a stem's faceplate by means of two included M5 x 18mm stem bolts - Compatible with Garmin Edge 200, 500, 510, 520, 800, 810, 910, 920, and 1000 - Accepts GoPro mounting style compatible accessories

- Lightweight nylon fiber Garmin handlebar mount with 90-degree rotating mounting plate - Compatible with Garmin Edge 200, 500, 510, 520, 800, 810, and 1000 - Out-front mounting position centers the computer in front of the stem - Fits both 25.4mm and 31.8mm handlebars with included adapter

- Lightweight nylon fiber Garmin handlebar mount with CNC machined AL6061 alloy GoPro mount - Compatible with Garmin Edge 200, 500, 510, 520, 800, 810, and 1000 - Accepts GoPro mounting style compatible accessories - Out-front mounting position centers the computer and accessories in front of the stem - Fits both 25.4mm and 31.8mm handlebars with included adapter

- Superlight computer/light mount fits cleanly underneath the stem - Replace a headset spacer(s) below or above the stem on any 1-1/8" steerer - 12mm stack height with 50mm wide mounting area, 120mm long angle adjustable arm

The TPH-1 Tablet Grip from Minoura is the ultimate tablet holder for indoor training. Fitting a diameter between 28mm and 35mm, this stand will fit most bicycles. - Perfect accessory to use with LiveTraining Apps, The Sufferfest videos, or other media - SM clamp easily mounts or dismounts from the handlebar or tube - Spring-loaded clamp system is simple to use and securely holds your device in place - Holds from a 7.9 to 9.7 inch screen with 360 degree rotation system - Can mount to your repair stand so you can easily reference the Internet when working on your bike

Constructed from a high quality proprietary polymer blend that is super durable. - Securely locks and perfectly positions your computer - Fits 31.8, 25.4 & 22.2mm handlebars - Simple one-bolt design makes installation a breeze - Compatible with Garmin Edge 20, 25, 130, 510, 520, 530, 810, 820, 830 & various other cycling computers - Not compatible with Edge 1000 series

Constructed from a high quality proprietary polymer blend that is super durable. - Securely locks and perfectly positions your computer - Fits 31.8, 25.4 & 22.2mm handlebars - Simple one-bolt design makes installation a breeze - Compatible with Wahoo Elemnt, Elemnt Mini, Elemnt Bolt and Elemnt Roam - Also compatible with Pioneer computers

KMC's digital ChainChecker is the most accurate tool for checking your chain’s elongation. - Measures up to 2.5mm elongation - Fits all chains including 11 speed - Handy electronic device - Stainless hardened metal body

- Control Center computer mount for any 31.8mm handlebar - Dual clamps provide superior holding power, excellent for GPS units

The X-Mount series securely holds any phone with any case and offers a minimalist profile. - Proprietary stretch materials grip your phone on all 4 corners

CatEye's ANT+ Speed/Cadence Sensor works with any ANT+ compatible cyclo-computer, including CatEye's Stealth EVO+, to give you speed and cadence data, so you can improve your cycling and track your rides. Attack each ride and celebrate your successes on the bike!

OEM CR2032 3V Lithium Battery used in most CatEye cycle computers.

Cadence Magnet for all CatEye computers that record cadence.

The H-34 Flex-Tight Bracket is an OEM handlebar bracket so you can attach Cateye accessories. It fits all handlebars up to 32mm in diameter.

- Dual band Bluetooth and ANT+, magnetless sensor with integrated accelerometer - Quick pairing with CatEye Cycling app (Bluetooth) - Waterproof IPX7 (based on JIS C0920) - Works with Padrone Digital, Padrone Smart+, Padrone Smart* and Strada Smart* *For Padrone Smart and Strada Smart, works in Mirror Mode only

CatEye Magnetless Bluetooth sensors with accelerometer. Dual-band Bluetooth, and ANT+ magnetless sensor with integrated accelerometer. Works with Padrone Digital, Padrone Smart+, Padrone Smart (in Mirror Mode), and Strada Smart. - Quick pairing with CatEye Cycling app - Sensors strap to hub shell and crank arm and uses accelerometer to measure speed/cadence

This Sensor works with the Strada Wireless RD300, Strada Wireless Universal CC-RD310W, Micro Wireless CC-MC200W, Urban Wireless CC-VT240W, and Urban Wireless + CC-VT245W.

Speed/Cadence Sensor Parts Kit for Strada Digital RD410DW, RD420DW, RD430DW, and V3n.

Accessory Mount from Cane Creek.

Cane Creek is proud to introduce an ultra-premium computer mount that is intuitive and easy to use. The Cane Creek Computer Mount is incredibly modular with 4 mounting orientations, several angle adjustments and compatibility to run an accessory mount. Every computer mount comes with a Garmin and Wahoo adapter and ability to run an accessory mount. The accessory mount is sold separately and has compatibility to run lights or a camera. Cane Creek's Computer Mount is made with 6061CNC Aluminum and Stainless Steel Black bolts.

- Compatible with Super Record, Record, and Athena EPS systems - Required for use with the charger and works with V2 systems - USA/North America plug - adapters required for other countries

EPS chargers and charger accessories specifically designed for charging all Campagnolo EPS batteries. - Required for charging Campagnolo EPS V4 power units - Also compatible with Campagnolo EPS V2 and V3 power units - Power cable sold separately

In conjunction with the EPS Power Unit, the Interface is the "thinking" center of EPS and is responsible for on board diagnostics, managing settings, converting analog signal from Ergo Levers to digital and sending it on to the Power Unit maintaining a dialogue with the Power Unit. - Has been updated to work with 12-speed cassette sprockets - The V4 version enables automatic shifting once a set gear inch ratio has been reached following the gear change - Wireless system to communicate with the MyCampy app via pc / notebook / tablet / smartphone (BTLE), allowing the user of the EPS groupset to personalize settings - 500mm cable length to Ergopower controls - 550mm cable length to EPS V4 power unit

The EPS Power Unit is the systems source of power as well as the "brain" of the system, responsible for managing the battery pack, enabling and monitoring the front and rear derailleurs and communicating with the Interface Unit. - Weathertight, o-ring sealed connectors - Lithium Ion battery duration: 500km/month - 1500km, 1000km/month - 1800km, 2000km/month - 2000km - Water proof to 1m for 30 minutes (IP67 Rated) - Operational temperature: -4F to 140F - Charging temperature: 32F to 113F - The V4 power unit features 10% better battery duration - 16.6mm diameter for easy seatpost installation - 259mm length

In conjunction with the EPS Power Unit, the Interface is the "thinking" center of EPS and is responsible for on board diagnostics, managing settings, converting analog signal from Ergo Levers to digital and sending it on to the Power Unit maintaining a dialogue with the Power Unit. - Can be fit to the right-hand side (only on the right-hand side) of compatible handlebars or on the down tube of compatible frames - 2 connectors on the rear side - one to connect to the power unit (gray), and one to connect to the Ergopower controls (orange) - FD/Shifter Compatibility: EPS