Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts & Accessories

$19.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Garmin Low Mount to add a Garmin GPS directly to the Blendr stem mount.
Key features:
- Blendr is an elegant, integrated accessory mounting solution
- Provides clean and secure mount for Garmin GPS
- Works with any Blendr-compatible stem and the accompanying base
- For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

$14.99 - $19.99
Blendr add-on to Kovee Pro 35 stems
Clean up your Bontrager Kovee Pro 35 stem cockpit with Blendr Pro bases.
- Blendr works with this simple formula: Stem + Base + Mount. Add accessory
- Bases for use with the Kovee Pro 35mm stem
- Add any accessory mount (sold separately) for an elegant, integrated look

$9.99
Light up the road
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Universal Ion Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen.
- Blendr is an elegant, integrated accessory mounting solution
- Clip can be rotated for compatibility with many Bontrager accessories
- Works with any Blendr-compatible stem and the accompanying base

$7.99
Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride.
Key features:
- Universal crank magnets work with any cadence sensor
- Get the perfectly sized magnet, sized right for your bike and sensor
- 20mm cadence magnet improves signal for wider gaps between crank and sensor

$3.99 - $24.99
Keep your computer and sensors ready for every ride with replacement batteries
Key features:
- CR2032 battery is used for most Trek and Bontrager computers
- 23AE battery is used for the Bontrager Interchange Analog Wireless Sensor
- LR44 and L1154 batteries are identical and used in Bontrager SpeedTrap Sensor

$74.99
Bontrager's DuoTrap Digital Speed/Cadence Sensor pulls double duty for your ANT+ cycling computer. It wirelessly transmits speed and cadence data and fits directly into the chainstay of certain Trek bicycles for a clean look that installs in seconds.

$74.99
Connect ANT+ and Bluetooth Smart devices to all of the data available from the DuoTrap S sensor for your on-the-bike wireless needs.
• ANT+ 2.4 GHz and Bluetooth Smart wireless digital speed and cadence sensor
• ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone
• For use with many ANT+ and Bluetooth Smart wireless technology enabled devices
• Includes Bontrager wheel magnet, crank cadence band, and CR2032 battery
• Works with Trek DuoTrap compatible bikes

$20.99
Easily mount a cell phone and case directly to your bars for safe convenient access with the Insta-Mount and keep all of your favorite cycling and fitness apps safely accessible.
• Mount your hard-shell smart phone case to your bike
• Allows for easy access of phone on stem or handlebar
• Includes Insta-Mount, universal mount, and application grid
• Blendr-compatible

$74.99
Get more data from your rides with the Bontrager Interchange digital combo speed and cadence sensor. This ANT+ 2.4 Ghz is designed to work with Bontrager Node wireless computers. It also works with many other ANT+ enabled devices. Sensor adjustment is easy with the adjustable arm.
• ANT+ 2.4 Ghz and Bluetooth Smart wireless digital speed and cadence sensor
• ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone
• For use with many ANT+ and Bluetooth Smart wireless technology enabled devices
• Independently adjustable arm for precise alignment of speed and cadence sensors
• Includes Bontrager wheel magnet and crank cadence band
• Includes silicone mounting strap to fit most chainstays and CR2032 battery
• Visit www.thisisant.com/directory/ for compatible ANT+ devices
• Visit www.bluetooth.com/pages/bluetooth-smart-devices.aspx for compatible Bluetooth devices

$3.99
- Replacement parts and accessories for SpeedTrap Digital Speed Sensor
- Fork Cap covers SpeedTrap pocket when sensor is removed
- Spacer is required on some forks to position sensor closer to wheel magnet

$34.99
Bontrager's SpeedTrap Digital Speed Sensor conveniently plugs into any Bontrager fork with SpeedTrap technology for the ultimate in convenience. And, it wirelessly transmits speed data to your ANT+ cycling computer.

$19.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Trip Computer Mount for a clean, flush look that securely holds your Bontrager Trip computer in a perfect position to see on the go.
Key features:
- Blendr is an elegant, integrated accessory mounting solution
- Provides clean and secure mount for Bontrager Insta-Mount or Trip Computer
- Works with any Blendr-compatible stem and the accompanying base
- For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

$39.99
Fits all phones with and without cases. Keep your phone within reach and storage for keys, wallet, charger and energy bar. Mount phone to top tube/frame or stem.
- Easy in/out mounting of phone.
- Secures phone with adjustable shock cord.
- Easy to install with multiple cut-to-length straps.
- Straps are multi-positional.
- Dimensions: 6" x 3.5" x 3", 70 cubic inches

$39.99
Are you looking for an incredibly simple way to mount your phone to your bicycle? Do you want that case to have a plethora of mounting options and accessories? Well... look no further than the ElastoKASE from BiKASE. Utilizing the 1/8 turn connection of the GoKASE and the simplicity of a rubber lined, gripping shock cord, the ElastoKASE is your "go to" phone or anything case.
• Phone holder for 6-inch phones and smaller
• Works with GoKASE attachments and brackets
• Material: TPE & Shock Cord

$24.99
BiKASE's iKASE is ideal for holding iPads, other tablets, and similar devices on your handlebars for using them when you're riding on an indoor trainer. It has a protective clear covering that keeps the sweat off your tablet while allowing full functionality. It quickly and securely straps on and lets you exercise to music or movies, read books, catch up on email, and check the news and social media. The iKASE can be positioned for your preferred viewing angle and the tablet can be rotated between landscape and portrait viewing while mounted.
• Material: 600 denier nylon
• Size: 10 x 7.5-inches
• Three Velcro straps on back for mounting
• Many uses including car mount and easy to hold

$19.99
The SuperBand is a tough, lightweight, and simple solution to attach virtually anything to your bike.
- Fits all size smartphones with or without a case (iPhone 10/X, 11, X plus, 7, plus, 8 plus, Samsung Galaxy, Samsung Note, Google Pixel 2, Google Pixel 2 XL, OnePlus, etc.)
- Easily holds down small items such as a light jacket, sunglasses, energy bars, pump, tubes, C02 cartridges, water bottle, flashlight, Bluetooth speaker, etc.
- Easily attaches to the top tube, stem, or seat post using durable rubber O-rings (2 sizes included)
- Can be attached to the water bottle bolts or a separate water bottle bracket
- Use on a bicycle, golf cart, stroller, ATV/UTV

$75.00
Zipp's QuickView Integrated stem faceplate computer mount provides an efficient fix for an emerging challenge on modern bikes: system integration. This new mount doubles as the stem faceplate for a clean look that securely holds your cycle computer and a light or camera. No more multiple mounts bolted on here and there. The mount sits in front of your Zipp stem, positioning it for easy viewing and access. This is an easy way to add elegant integration to your road bike.
- Computer compatibility: Garmin, Wahoo
- Accessory compatibility: GoPro
- Lights: Niterider Lumina Series (with adapter), Light and Motion, Bontrager (with adapter), Gloworm (with adapter), Lezyne (with adapter), Infini (with adapter), Sigma Sport
- Lifetime warranty

$70.00
Zipp's QuickView Integrated stem faceplate computer mount provides an efficient fix for an emerging challenge on modern bikes: system integration. This new mount doubles as the stem faceplate for a clean look that securely holds your cycle computer and a light or camera. No more multiple mounts bolted on here and there. The mount sits in front of your Zipp stem, positioning it for easy viewing and access. This is an easy way to add elegant integration to your road bike.
- Computer compatibility: Garmin, Wahoo
- Accessory compatibility: GoPro
- Lights: Niterider Lumina Series (with adapter), Light and Motion, Bontrager (with adapter), Gloworm (with adapter), Lezyne (with adapter), Infini (with adapter), Sigma Sport
- Lifetime warranty

$22.00
Low Road position places the computer in front of the bar and nearly flush with the top of the bar, making for an easy to read display whether you are on the hoods or in the drops.
- Sub-20 gram computer mount
- Compatible with computers with 1/4 turn twist lock interface and 31.8mm bar surface
- Single Torx T25 fixing bolt

$39.99
Wahoo USB ANT+ dongle Kit connects KICKR, KICKR SNAP and other ANT+ enabled devices to a Mac or PC. The 3-foot extension cord extends the USB ANT+ transmitter away from the computer and towards the connected device to avoid signal interference.

$20.95
Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position.
- Clamp: Fits 22-38 mm tubes (shims included)
- Crossbar: Device mount bar 25.4 mm
- Material: Engineering Grade Plastic and Steel
- Mount: Handlebar, Handlebar Stem
- Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded)
- Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open)
- Weight: 116 g / 4.08 oz

$240.99
- Di2 internal battery, fits all e-Tube Di2 groups
- Capacity: 500 mAH (± 2000km)
- Use with EW-WU101 or SC-MT800 interfaces/junction to gain BlueTooth Smart wireless connectivity for on-the-fly adjustments with smartphones and tablets
- Requires SM-BCR2 charger

$184.99
The new DN300 Built-In type battery features the same waterproof design that Di2 users have loved for generations. Now with 3 ports, it delivers stable power to Shimano's 12-speed road derailleurs (and shifters if a fully wired option is selected).
- Compatible with thinner next-generation electric wire SD300 and systems after R9250/R8150 series
- Li-Ion type
- Capacity: 500 mAH |3.7Wh (± 2000km autonomy)
- Rated voltage: 7.4V
- Charges through RD-R9250 |RD-R8150 rear derailleur using EW-EC300 Di2 Charging Cable (sold separately)
- Fixing small parts included
- Weight: 52g

$13.99
Wire harness and hardware to measure computer data based on the rear wheel
- Contains bracket with 130cm wire, wheel magnet (fits up to 4mm bladed spokes) and zip ties
- Bracket fits most bars (25.4 to 31.8mm)
- Compatible with: Protegé 5.0, 8.0 and 9.0
- Ideal for rear wheel indoor bicycle trainers

$13.99
Protege wire harness and hardware with extra length for use with tandem and recumbent bicycles
- Contains bracket with 160cm wire, wheel magnet and zip ties
- Brackets fits Standard (25.4-26.0mm) bars
- Compatible with: Protegé 5.0, 8.0 and 9.0
- Ideal for long wheelbase recumbent and computer installs on a tandem’s rear bars

$9.59
Replace your worn or damaged wiring on Origin8 wired computers (97517 / 97570)
- Includes bracket with (155cm) wired sensor, screw magnet and 4 cable ties
- Includes: Wiring Kit
- Compatibility: Data Station 8 / 10
** HEAD mount is HANDLEBAR mount only (not stem)

$32.29
• Handlebar mount for Garmin Edge 200, 500, and 800
• Fits handlebars 22.2 to 31.8mm (Shims included)
• Forged and CNC`d alloy construction

$32.29
- CNC machined AL6061 alloy GoPro mount for handlebars or seatposts
- Accepts GoPro mounting style compatible accessories
- GoPro mount rotates 90° for ideal positioning of accessories
- Fits 22.2mm, 25.4mm, and 31.8mm handlebars with included adapter
- Fits 27.2mm, 30.9mm, and 31.6mm seatposts with included adapter