Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts & Accessories
$500.95
The EPS Power Unit is the systems source of power as well as the "brain" of the system, responsible for managing the battery pack, enabling and monitoring the front and rear derailleurs and communicating with the Interface Unit.
- Weathertight, o-ring sealed connectors
- Lithium Ion battery duration: 500km/month - 1500km, 1000km/month - 1800km, 2000km/month - 2000km
- Water proof to 1m for 30 minutes (IP67 Rated)
- Operational temperature: -4F to 140F
- Charging temperature: 32F to 113F
- The V4 power unit features 10% better battery duration
- 16.6mm diameter for easy seatpost installation
- 259mm length
$206.45
In conjunction with the EPS Power Unit, the Interface is the "thinking" center of EPS and is responsible for on board diagnostics, managing settings, converting analog signal from Ergo Levers to digital and sending it on to the Power Unit maintaining a dialogue with the Power Unit.
- Has been updated to work with 12-speed cassette sprockets
- The V4 version enables automatic shifting once a set gear inch ratio has been reached following the gear change
- Wireless system to communicate with the MyCampy app via pc / notebook / tablet / smartphone (BTLE), allowing the user of the EPS groupset to personalize settings
- 500mm cable length to Ergopower controls
- 550mm cable length to EPS V4 power unit
$199.99
Stay aware of approaching cars with Varia RTL515 rearview radar. It pairs with your Edge bike computer or compatible smartphone to alert
you of vehicles approaching from behind up to 153 yards (140 meters) away. When used with your compatible smartphone, the Varia app uses
bold graphics — plus tone and vibration alerts — to indicate the position and speed of approaching vehicles.
MAXIMUM AWARENESS
- Varia RTL515 rearview radar provides visual and audible alerts for vehicles approaching from behind up to 153 yards (140 meters) away.
MULTIPLE PAIRING OPTIONS
- This radar works seamlessly with your Edge bike computer or compatible smartphone as well as select Garmin wearables or the optional radar display unit.
WORKS WITH THE VARIA APP
- This smartphone app helps you increase your awareness by providing graphics — plus tone and vibration alerts — that indicate the position and speed of approaching cars.
THIRD-PARTY APP COMPATIBLE
- When used with a compatible smartphone, Varia radar integrates with your favorite apps, such as Ride with GPS to overlay your maps with rearview radar alerts.
SUPERIOR VISIBILITY
- Alert motorists to your presence as soon as possible with daylight visibility up to 1 mile.
COMPACT DESIGN
- Easily mount this sleek, compact device on the seatpost of almost any road-use bicycle. The vertical design allows for better leg clearance and a perfectly comfortable ride.
PELOTON MODE
- Varia RTL515 features multiple modes, including peloton mode, which provides a low-intensity flash that is kind to other cyclists’ eyes when riding in a group.
BATTERY LIFE
- Time spent charging is not as good as time spent riding. Get up to 16 hours of battery life in day flash mode and up to 6 hours in solid mode.
Physical Specifications
- Dimensions: 3.9” x 0.8” x 1.6" (98.6 x 19.7 x 39.6 mm)
- Weight: 2.5 oz (71.0 g)
- Modes: solid, peloton, night flash, day flash
- Lumens: 20 solid, 8 peloton, 29 night flash, 65 day flash
- Battery life: 6 hours solid, 8 hours peloton, 6 hours night flash, 16 hours day flash
- ANT+: Yes
- BLE: Yes
- Water rating: IPX7
- Viewing angle: 220°
In the box:
- Varia RTL515
- Mounting Kit
- Cables
- Documentation
$199.99
Know what's coming.
Ride with extra confidence with Trek CarBack Radar Rear Light. CarBack's radar helps detect rear-approaching vehicles from up to 240m and provides audio and visual alerts through paired GPS head units for increased on-bike awareness.
Built with integrated best-in-class Daytime Running Lights that are visible from up to 2km away, CarBack is a must-have for every cyclist riding on shared roads.
- CarBack can detect and alert riders of rear-approaching vehicles from up to 240m away
- Compatible with most cycling GPS computers
- Pair CarBack with the Trek Accessory app to see a vehicle's rear-approaching and passing distance on your smartphone
- Designed with focus, flash, and range to be Daytime-visible from up to 2km away
- Four light flash modes: Day Flash 90LM, Day Steady 25LM, Night Steady 5LM, and Night Flash 5 LM
- Visible fuel gauge LEDs make it easy to see CarBack's 7+ hour battery status
- IPX7 waterproof rating to confidently ride through wet conditions
- Includes Quick Connect Plus rear mount and USB-C charging cable
$184.99
The new DN300 Built-In type battery features the same waterproof design that Di2 users have loved for generations. Now with 3 ports, it delivers stable power to Shimano's 12-speed road derailleurs (and shifters if a fully wired option is selected).
- Compatible with thinner next-generation electric wire SD300 and systems after R9250/R8150 series
- Li-Ion type
- Capacity: 500 mAH |3.7Wh (± 2000km autonomy)
- Rated voltage: 7.4V
- Charges through RD-R9250 |RD-R8150 rear derailleur using EW-EC300 Di2 Charging Cable (sold separately)
- Fixing small parts included
- Weight: 52g
$166.99
- Di2 internal battery, fits all e-Tube Di2 groups
- Capacity: 500 mAH (± 2000km)
- Use with EW-WU101 or SC-MT800 interfaces/junction to gain BlueTooth Smart wireless connectivity for on-the-fly adjustments with smartphones and tablets
- Requires SM-BCR2 charger
$154.95
EPS cable kits come in multiple options that allow for the mounting of the power unit beneath the bottom bracket or beneath the saddle.
- Weathertight o-ring sealed connectors
- Fitting the V4 internal interface to the handlebar (only right-hand side) requires two cablings - 1 cabling from the interface to the Ergopower controls, and 1 cabling from the interface unit to the power unit
- 100mm from the interface unit to the splitter
- 340mm from the splitter to the right-hand side Ergopower control
- 1300mm from the splitter to the left-hand side Ergopower control
- 800mm from the interface unit to the power unit
$125.00
KMC's digital ChainChecker is the most accurate tool for checking your chain’s elongation.
- Measures up to 2.5mm elongation
- Fits all chains including 11 speed
- Handy electronic device
- Stainless hardened metal body
$120.00
- Shift buttons mounted to the end of a bar plug
- Included wire connects to Blip Box
- Fits bars with 19 - 20.5mm inside diameter
$118.00
Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want.
- Limitless remote shifting positions for drop and aero bars
- Wired shift buttons can be positioned however the rider prefers
- Connect to Blip Box or drop bar eTap levers
- Compatible with SRAM RED eTap shift/brake controls
$105.95
EPS cable kits come in multiple options that allow for the mounting of the power unit beneath the bottom bracket or beneath the saddle.
- Weathertight o-ring sealed connectors
- Fitting the V4 internal interface to the frame requires 1 cabling from the interface to the Erogopower controls
- 900mm from the interface unit to the splitter
- 800mm from the splitter to the Ergopower controls
$79.99
Connect ANT+ and Bluetooth Smart devices to all of the data available from the DuoTrap S sensor for your on-the-bike wireless needs.
• ANT+ 2.4 GHz and Bluetooth Smart wireless digital speed and cadence sensor
• ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone
• For use with many ANT+ and Bluetooth Smart wireless technology enabled devices
• Includes Bontrager wheel magnet, crank cadence band, and CR2032 battery
• Works with Trek DuoTrap compatible bikes
$79.99
Get more data from your rides with the Bontrager Interchange digital combo speed and cadence sensor. This ANT+ 2.4 Ghz is designed to work with Bontrager Node wireless computers. It also works with many other ANT+ enabled devices. Sensor adjustment is easy with the adjustable arm.
• ANT+ 2.4 Ghz and Bluetooth Smart wireless digital speed and cadence sensor
• ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone
• For use with many ANT+ and Bluetooth Smart wireless technology enabled devices
• Independently adjustable arm for precise alignment of speed and cadence sensors
• Includes Bontrager wheel magnet and crank cadence band
• Includes silicone mounting strap to fit most chainstays and CR2032 battery
• Visit www.thisisant.com/directory/ for compatible ANT+ devices
• Visit www.bluetooth.com/pages/bluetooth-smart-devices.aspx for compatible Bluetooth devices
$79.99
Shimano BT-R1A External Di2 Battery
- All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions
- Use Di2 system checker to update component firmware
- Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems
- Battery weight: 71 grams
$74.99
Bontrager's DuoTrap Digital Speed/Cadence Sensor pulls double duty for your ANT+ cycling computer. It wirelessly transmits speed and cadence data and fits directly into the chainstay of certain Trek bicycles for a clean look that installs in seconds.
$74.99
Cane Creek is proud to introduce an ultra-premium computer mount that is intuitive and easy to use. The Cane Creek Computer Mount is incredibly modular with 4 mounting orientations, several angle adjustments and compatibility to run an accessory mount. Every computer mount comes with a Garmin and Wahoo adapter and ability to run an accessory mount. The accessory mount is sold separately and has compatibility to run lights or a camera. Cane Creek's Computer Mount is made with 6061CNC Aluminum and Stainless Steel Black bolts.
$74.95
CatEye Magnetless Bluetooth sensors with accelerometer.
Dual-band Bluetooth, and ANT+ magnetless sensor with integrated accelerometer. Works with Padrone Digital, Padrone Smart+, Padrone Smart (in Mirror Mode), and Strada Smart.
- Quick pairing with CatEye Cycling app
- Sensors strap to hub shell and crank arm and uses accelerometer to measure speed/cadence
$71.99
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete.
- Finish: Black
- Compatibility: SRAM RED eTap
$69.99
All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers.
- Dimensions (LxWxH): 1.25" x.75" x 1"
- Weight: 7 grams (without mount)
- Battery: CR2032
- Battery Life: Up to 12 months
- Water Rating: IPX7 (waterproof up to 5 ft)
- Wireless Signal Strength: Up to 10 feet
- Note: Speed Sensor is NOT compatible with spin bikes
$67.99
The strongest K-EDGE Mount yet, designed for today’s heaviest computers, cameras and lights. Upgrade to the Garmin Max Combo mount for a solid and clean platform for your cycling electronics. Chosen by the best, year after year, when quality, performance and craftsmanship matter.
- Max XL combo mount is compatible with all Garmin Cycling Computers
- Combo Mount (Computer on top – light or camera underneath) with GoPro style light/camera interface
- GARMIN approved replaceable computer insert protects computer tabs
- CNC Machined Aluminum, Anodized Black with laser etched logos
- Made in-house, Boise, Idaho USA with a Lifetime Warranty
- Weight: 63g
$64.99
The strongest K-EDGE Mount yet, designed for today’s heaviest computers, cameras and lights. Upgrade to the Garmin Max Combo mount for a solid and clean platform for your cycling electronics. Chosen by the best, year after year, when quality, performance and craftsmanship matter.
- Max combo mount is compatible with GARMIN Cycling Computers smaller than EDGE 1000, 1030 style (example EDGE 820)
- Combo Mount (Computer on top – light or camera underneath) with GoPro style light/camera interface
- GARMIN approved replaceable computer insert protects computer tabs
- CNC Machined Aluminum, Anodized Black with laser etched logos
- Made in-house, Boise, Idaho USA with a Lifetime Warranty
- Weight: 60g
$59.99
Speed/Cadence Sensor Parts Kit for Strada Digital RD410DW, RD420DW, RD430DW, and V3n.
$59.99
Superlight, machined aluminum, race mount for the ultimate Tour de France level performance. At 32 Grams the Race Mount is 33% lighter than the “standard” Garmin Mount.
- CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface
- Compatibility: Garmin 820, 520, 510, 500, 25, 20
- Fits Handlebars: 31.8MM
- NOT GoPro Compatible
- Anodized Color: Black, Red, Blue, Red/Blue
- Made in Boise, Idaho, USA
- Lifetime Guarantee against material or manufacturer defects. Damages due to abuse or crashing excluded.
* Attention: ASSEMBLY BOLTS NOT MEANT TO BE REMOVED OR TAMPERED WITH AT ANY TIME.
The torx head bolts are installed using a permanent thread-lock compound. Doing so will void all warranties.
Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Sigma instructions that recommend use of the provided tether leash.
$59.99
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs.
- Up to 1000 kilometers of riding per charge
- Weight: 24g
- Finish: Black
- Compatibility: SRAM RED eTap
$59.95
CatEye's ANT+ Speed/Cadence Sensor works with any ANT+ compatible cyclo-computer, including CatEye's Stealth EVO+, to give you speed and cadence data, so you can improve your cycling and track your rides. Attack each ride and celebrate your successes on the bike!
$54.99
Pro Blendr is the ultimate computer integration system for clean and easy installation directly to Knock Block.
- Start with a Knock Block equipped frame using the appropriate frame chip with display tabs, and finish with Pro Blendr Knock Block Computer Mount for secure mounting of computers behind the stem to keep your cockpit spotless.
- In addition to the correct frame chip with display tabs, don't forget your Garmin or Wahoo Adapter Puck! These are sold separately so you can build the ultimate Blendr system that's right for you.
$52.99
- CNC machined AL6061 alloy Garmin/GoPro stem mount
- Mounts to a stem's faceplate by means of two included M5 x 18mm stem bolts
- Compatible with Garmin Edge 200, 500, 510, 520, 800, 810, 910, 920, and 1000
- Accepts GoPro mounting style compatible accessories
$49.99
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy.
- Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers.
- No tangled wires on your bike to connect the sensor to your device.
- It only weighs 7 grams!
- Provides accurate cadence data during your ride
- (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties.
- The RPM can be worn on your shoe for spin classes or use with multiple bikes
- Two LED lights show the sensor's device connection (blue) and cadence detection (red)
- No charging required! Operates on a coin cell battery for up to 1 years.
- RPM cadence sensor will fit with most bikes and frame sizes
$44.49
• Handlebar mount for Garmin Edge 200, 500, and 800
• Fits handlebars 22.2 to 31.8mm (Shims included)
• Forged and CNC`d alloy construction
$44.49
- CNC machined AL6061 alloy GoPro mount for handlebars or seatposts
- Accepts GoPro mounting style compatible accessories
- GoPro mount rotates 90° for ideal positioning of accessories
- Fits 22.2mm, 25.4mm, and 31.8mm handlebars with included adapter
- Fits 27.2mm, 30.9mm, and 31.6mm seatposts with included adapter
Page 1 of 4
Next page